UpTempO 2018 #1 Amundsen - Deceased
Made by Pacific Gyre , with temperature, conductivity, and tilt sensors by Soundnine.
Iridium ID # (IMEI = International Mobile Equipment Identity): 300234064737090
ocean temperature at nominal depths (m): 0, 2.5, (3), 5, 7.5, (9), 10, 15, (15.5), 20, 25 (CT sensor depths in parenthesis)
ocean salinity at nominal depths (m): 3.0, 9.0, 15.5
ocean pressure depths (m): 25
This buoy was deployed in Hudson Bay from the Amundsen on 6/14/2018.
SUMMARY
The plot below shows the path of UpTempO 2018 #1 Amundsen colored by month. The flag marks the buoy's last known location. Black contours show two isobaths: 28 m ("short buoy" max depth: e.g., 2011 APLIS buoy) and 60 m ("standard buoy"
max depth).
The dashed lines show the temperature reported by CT sensors at 3, 9, and 15.5m, nominal.





Buoy Name: UpTempO 2018 #1 Amundsen
Modem ID (last 4 or 6 digits): 7090
Position: 62.20N 88.37W
Vessel: Amundsen
Position: 63.48N 76.66W
Battery Voltage: 11.4V
Modem ID (last 4 or 6 digits): 7090
DEPLOYED
Date: 6/14/2018Position: 62.20N 88.37W
Vessel: Amundsen
LAST TRANSMISSION
Date: 10/ 5/2018Position: 63.48N 76.66W
Battery Voltage: 11.4V
DOWNLOAD DATA
LEVEL 1 DATA
Data File Size: 1056.775 kbLEVEL 2 DATA
Data File Size: 1267.275kbTEMPERATURE TIME SERIES
The temperature time series for each thermistor is shown below, plotted against day of the year or date.The dashed lines show the temperature reported by CT sensors at 3, 9, and 15.5m, nominal.


SALINITY TIME SERIES
Salinity reported by a CTD sensor at a nominal.
TILT TIME SERIES
The tilt reported from each Tpod gives the angle from vertical of the Tpod. The tilt series' below are smoothed first with a 3-hr median filter, followed by a 6-hr running mean smoother.

OCEAN PRESSURE AND SEA LEVEL PRESSURE
This plot shows the ocean pressure(s) from the barometers placed at nominal depths (left axis), and sea level pressure in red (right axis).
BATTERY VOLTAGE/SUBMERGENCE PERCENT
Derived Quantities
VELOCITY TIME SERIES
One to three hourly velocity is on the left axis.Distance between the buoy's start point and end point each day is shown in red on the right axis.Note that the total displacement of the buoy each day (red) is generally less than what one would calculate from the hourly velocities.